E3S Web of Conferences
Volume 44, 201810th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|Number of page(s)||8|
|Published online||03 July 2018|
Parametric analysis of Li-ion battery based on laboratory tests
Warsaw University of Technology, Department of Multisource Propulsion Systems, Narbutta 84, 02-524 Warsaw, Poland
* Corresponding author: firstname.lastname@example.org
The study of Li-ion battery based on laboratory tests was presented and analysed taking into consideration various aspects. The tests with different charging and discharging currents were carried out. Moreover, some additional tests with the use of temperature chamber were applied. The results derived from laboratory tests allowed to obtain the characteristics of the electromotive force of two types of Li-ion cylindrical cell batteries. Subsequently, the influence of temperature on battery useful capacity was analysed. Therefore, the characteristics of internal resistance for studied batteries were determined based on obtained results and according to battery non-linear modelling [1, 2]. Finally, the possibilities for further development of the presented research have been considered.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.