| Issue |
E3S Web Conf.
Volume 44, 2018
10th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|
|
|---|---|---|
| Article Number | 00082 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/20184400082 | |
| Published online | 03 July 2018 | |
The application of Standardized Precipitation Index (SPI) to monitor drought in surface and groundwaters
Wroclaw University of Environmental and Life Sciences, Institute of Environmental Engineering, 24 Grunwaldzki Sq., 50-363 Wroclaw, Poland
* Corresponding author : justyna.kubicz@upwr.edu.pl
The paper presents the initial studies with the aim to assess the possibility to apply of Standardized Precipitation Index SPI to monitor drought in surface and groundwaters. The fact that data about precipitation are highly available allows for precise monitoring of the periods of occurrence and intensification of meteorological drought by determining the standardized SPI index. The evaluation of current water deficits in surface water courses and groundwaters is very difficult due to the fact that the measurement network is relatively scarce. In order to apply SPI to monitor hydrological and hydrogeological drought, it is required to assess the significance and level of the correlation between drought indices in the test area and then to calculate the probability of correct determination of drought in surface and groundwaters with use of SPI.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.