E3S Web of Conferences
Volume 44, 201810th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|Number of page(s)||8|
|Published online||03 July 2018|
Fractions of heavy metals in the soil of the urban agglomeration with increased traffic
Kielce University of Technology, Faculty of Construction and Architecture,
2 Kielce University of Technology, Faculty of Environmental, Geomatic and Energy Engineering, Department of Water Supply and Sewage Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland
Corresponding author: email@example.com
The paper presents the results of research on the content of selected heavy metals (Cu, Pb, Zn, Ni) depending on pH, organic carbon content and soil sorption in the direct location of busy streets around the campus of the Kielce University of Technology. Based on the conducted studies of the sequential fractionation of metals by the BCR method was found that the highest content of nickel fraction FI (exchangeable) was 142.75 mg/kg. However, the total nickel concentration in all research areas exceeded the value specified in the Journal of Laws approx. 2 times. The lowest content from the analyzed metals in the surface layer of soil was found for zinc, the content of which was 1.5% in relation to the standard. The average percentage share of the analyzed metals in the separated fractions, in relation to the total content, was in decreasing series for Ni: FIII > FI> FII> FIV; for Pb: FII > FI > FIV > FIII; for Cu: FII > FI > FIII > FIV and for Zn: FII > FIII > FI > FIV. The studied soils are characterized by a varied granulometric composition of sand fraction, from very thick (1000 μm–2000 μm) to very fine 2 μm–50 μm). Statistical calculations showed that the pH, Corg content and sorptivity of the studied soil correlate with each other.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.