E3S Web of Conferences
Volume 44, 201810th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|Number of page(s)||7|
|Published online||03 July 2018|
Investigation of temperature drop in domestic hot water circuit
Poznan University of Technology, Institute of Environmental Engineering, ul. Berdychowo 4, 61-131 Poznań, Poland
Corresponding author : email@example.com
The results of experimental investigation of determining the time of temperature drop in domestic hot water circuit were presented in this paper on the example of single-family house. The test were carried out on vertical sections of installations made of PE-X/Al/PE pipes (cross-linked polyethylene and aluminum) with and without insulation. The temperature drop process was investigated in temperature range typical for domestic hot water installation from 55ºC to 40ºC. On the basis of the obtained results with appropriate adjustment of the working time of circulation pump, energy savings of 90% were achieved.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.