| Issue |
E3S Web Conf.
Volume 44, 2018
10th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|
|
|---|---|---|
| Article Number | 00180 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/20184400180 | |
| Published online | 03 July 2018 | |
The use of the SCADA system in the monitoring and control of the performance of an autonomous hybrid power supply system using renewable energy sources
Poznan University of Technology, Faculty of Electrical Engineering, Institute of Electrical Engineering and Electronics, St. Piotrowo 3a, 60 – 965 Poznan, Poland
* Corresponding author : grzegorz.trzmiel@put.poznan.pl
The paper touches upon the current issues related to the use of visualisation, control and archiving systems (SCADA) in hybrid power supply systems, based on the example of an installation that uses the energy of the sun and wind. The article contains an exemplary design of an autonomous hybrid power supply system and the SCADA system implemented in the Vijeo Citect environment. The major focus is on the presentation of the essential and the most frequently used SCADA system functionalities in terms of the monitoring and control of this type of power supply systems.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.