| Issue |
E3S Web Conf.
Volume 45, 2018
VI International Conference of Science and Technology INFRAEKO 2018 Modern Cities. Infrastructure and Environment
|
|
|---|---|---|
| Article Number | 00035 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/20184500035 | |
| Published online | 30 July 2018 | |
An assessment of water quality in dam reservoirs, considering their aggressive properties
Faculty of Civil and Environmental Engineering and Architecture, Rzeszów University of Technology, al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland
* Corresponding author: pkoszel@prz.edu.pl
The paper presents the water classification of four small retention reservoirs on the basis of selected physical and chemical indicators, such as: conductivity, pH level, dissolved oxygen, calcium hardness, general hardness and alkalinity. Three reservoirs (Ożanna, Kamionka and Cierpisz) are within the limits in terms of average values for the second class of water quality. Water in the Nowa Wieś reservoir does not qualify as second quality class of surface water. These reservoirs have had very irregular seasonal variations of water quality. Unambiguous correlations have not been established. Aggressive properties of water have been tested on the basis of Langelier (IL) or Ryznar (IR) indexes and calcium carbonate saturation [pHs]. Waters in the Ożanna and Nowa Wieś reservoirs do not have aggressive properties. Both the Kamionka and Cierpisz reservoirs are characterized by corrosive and leaching aggressiveness.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.