E3S Web Conf.
Volume 45, 2018VI International Conference of Science and Technology INFRAEKO 2018 Modern Cities. Infrastructure and Environment
|Number of page(s)||7|
|Published online||30 July 2018|
Innovative technologies in municipal wastewater treatment plants in Sweden to improve Baltic Sea water quality
Department of Sustainable Development, Environmental Science and Engineering, Royal Institute of Technology (KTH), Sweden
* Corresponding author: firstname.lastname@example.org
The article presents new trends in the treatment of municipal wastewater in Sweden caused by the constantly increasing requirements for discharging pollutants into Baltic Sea waters. The development of new technologies for nitrogen removal, pharmaceutical residues removal and the possibility of using membrane processes in wastewater treatment is presented. The state of research on innovative wastewater treatment processes at the level of pilot-scale tests and their implementation in full technical scale has been described. These technologies can allow the application of new, economical and environmentally friendly wastewater treatment processes based on biological, chemical and physical methods. Swedish wastewater treatment plants are preparing to meet the new conditions required for discharged wastewater with a value of 6 mg N/L for total nitrogen and 0.2 mg P/L for total phosphorus. This requires large investments in the reconstruction of municipal wastewater treatment plants and the introduction of new treatment processes.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.