Issue |
E3S Web Conf.
Volume 46, 2018
3rd International Conference on Energy and Environmental Protection
|
|
---|---|---|
Article Number | 00001 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/20184600001 | |
Published online | 13 September 2018 |
A research station with a two-disc cutting unit for studying the cutting process of energy
Warsaw University of Technology, Faculty of Civil Engineering, Mechanics and Petrochemistry, Institute of Mechanical Engineering, Łukasiewicza 17, 09-400 Płock, Poland
* Corresponding author: henryk.rode@pw.edu.pl
The paper presents the construction of a new research station for studying the cutting process of energy plants. The station consists of 3 basic units: a truck with drive and cutting units, a frame which is a guide for the truck moving on it, and a base for placing the plant’s stems. The station allows to determine the unitary energy of the cutting process for various rotary and travelling speeds of the cutting unit and for various sizes, spacing and angles of inclination of the cutting discs. It also allows to form freely the cut plants’ stems’ sockets.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.