E3S Web Conf.
Volume 49, 2018SOLINA 2018 - VII Conference SOLINA Sustainable Development: Architecture - Building Construction - Environmental Engineering and Protection Innovative Energy-Efficient Technologies - Utilization of Renewable Energy Sources
|Number of page(s)||7|
|Published online||13 August 2018|
Indoor air in autonomous building
Kielce University of Technology (PŚk), Faculty of Civil and Environmental Engineering, Kielce, Poland
2 Kazimierz Pulawski University of Technology and Humanities in Radom, Radom, Poland
* Corresponding author: email@example.com
The paper describes the use of renewable energy sources in an autonomous home in the aspect of sustainable development. The work contains an analysis of the results of the quality parameters of the internal microclimate (carbon dioxide concentration and relative humidity), mycological cleanliness of the enclosed spaces in the study was taken into account, the immediate proximity of the pond as a biological treatment plant, which is also an integral part of the ecosystem with a closed cycle of organic matter and influences independence energy of the tested object. Parameters of the microclimate were taken from the BMS (Building Management System) installed in the facility, while mycological purity tests were carried out using the sedimentation and collision method. Based on the conducted analyses, conclusions have been drawn that can be used in the design of autonomous objects.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.