| Issue |
E3S Web Conf.
Volume 49, 2018
SOLINA 2018 - VII Conference SOLINA Sustainable Development: Architecture - Building Construction - Environmental Engineering and Protection Innovative Energy-Efficient Technologies - Utilization of Renewable Energy Sources
|
|
|---|---|---|
| Article Number | 00098 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/20184900098 | |
| Published online | 13 August 2018 | |
Assessment of a steel bridge corrosion degree
1
Częstochowa University of Technology, Faculty of Civil Engineering, Department of Concrete Structures and Geotechnics, Akademicka 3 st., 42-200 Czestochowa, Poland
2
Const-Pro Design Office, 3 Chopina st., 46-300 Olesno, Poland
* Corresponding author: murbanski@interia.eu
The subject of this analysis is connected with the verification of the load capacity of the span structure taking into account the degree of corrosion of the railway viaduct components located at 41.446 km, on the railway line no. 301 of "Kotlarnia" SA Sand Mine built over the national road DK88 and railway tracks PKP-PLK near T. Kościuszki street in Zabrze The general condition of the structure with regard to the corrosion assessment of structural steel is presented in the paper. Static and strength calculations were carried out to determine the load capacity class, and as a result of the analysis it was found that the technical condition of the facility steel girders is suitable for repair.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.