Issue |
E3S Web Conf.
Volume 49, 2018
SOLINA 2018 - VII Conference SOLINA Sustainable Development: Architecture - Building Construction - Environmental Engineering and Protection Innovative Energy-Efficient Technologies - Utilization of Renewable Energy Sources
|
|
---|---|---|
Article Number | 00124 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/20184900124 | |
Published online | 13 August 2018 |
Bentonite clay suspension -coagulation process and identification of properties
AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Department of Power Systems and Environmental Protection, Mickiewicza 30, 30 - 059 Kraków, Poland
* Corresponding author: piotr.warzecha@agh.edu.pl
The main aim of the research presented in this paper is study of volume coagulation of bentonite suspension. Investigation of physical properties included measurement of particle size distribution, chemical and phase analysis of prepared suspension, as well as preparation of sedimentation test graph and determination of dependence between concentration of the suspension and turbidity of the suspension. Relationship between coagulant dose and concentration was also determined during this analysis. This research could help in determination of critical coagulation concentration duringanalysis of coagulation process. Also it could be used duringsimulations of distribution of suspension in high - performance sedimentation settling tanks for suspension of similar origin in water treatment process.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.