Issue |
E3S Web Conf.
Volume 49, 2018
SOLINA 2018 - VII Conference SOLINA Sustainable Development: Architecture - Building Construction - Environmental Engineering and Protection Innovative Energy-Efficient Technologies - Utilization of Renewable Energy Sources
|
|
---|---|---|
Article Number | 00135 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/20184900135 | |
Published online | 13 August 2018 |
The use of heat from the CO2 compression system for production of system heat
Energy Engineering Department, Faculty of Infrastructure and Environment, Czestochowa University of Technology, Brzeznicka Street 60A, 42-200 Czestochowa, Poland
* Corresponding author: zarzycki@is.pcz.pl
The study presents the concept and computations of the CO2 compression for the purposes of transport and underground storage of the gas. Cooling between individual stages is needed to reduce the power needed for CO2 compression. Heat obtained from the cooling process can be used to provide heat to the municipal heat power systems. A design of a heat accumulator for storage of excess heat was proposed in order to improve heat supply safety. The solution proposed in the study allows for heating condensing power units using waste heat from the CO2 cooling process.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.