| Issue |
E3S Web Conf.
Volume 53, 2018
2018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering, Materials and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/20185301007 | |
| Published online | 14 September 2018 | |
Study on Induced Current of Iron Plate Irradiated by Pulsed Gamma Rays
Northwest Institute of Nuclear Technology, Xi'an, 710024, China
* Corresponding author: zuoyinghong@nint.ac.cn
To obtain the transient current response law of the metal component irradiated by pulsed gamma rays, the pulsed gamma ray irradiation experiment of the iron plate was carried out on “Qiangguang-I” accelerator. The transient current of iron plate generated by pulsed gamma rays was measured and analysed, and the relationship between the amplitude of pulse current and the dose rate of gamma rays was obtained. The results show that the current response sensitivity of the iron plate is about 5.7×10-7(A/m2)/(Gy/s) when the gamma rays with the energy of 0.8 MeV irradiate the iron plate. The charge deposition rate in the iron plate can be obtained by Monte Carlo simulation, and then it can be converted to gamma ray induced current of the metal component irradiated by gamma rays.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.