| Issue |
E3S Web Conf.
Volume 53, 2018
2018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|
|
|---|---|---|
| Article Number | 01027 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering, Materials and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/20185301027 | |
| Published online | 14 September 2018 | |
Investigation on NO Oxidation during Ozone Oxidation Denitration of Sintering Flue Gas
Guangdong J-Tech Environment Science Co., Ltd., Guangzhou 510663, China
* Corresponding author: yangyx@gdj-tech.com
With the intensified requirements on ambient air quality, controlling NOx emission from sintering flue gas has become the most important priority in steel industry. Ozone oxidation denitration process has become the most closely watched sintering flue gas denitration technology. In order to investigate the influence of different operating conditions on NO oxidation in practical engineering application of ozone oxidation denitration process, an ozone oxidation system was built, and sintering flue gas was extracted from the pipeline between the induced draft fan and the desulfurization tower. The influence of discharge power and O2 flow rate of ozone generator on O3 concentration, O3 yield and NO oxidation efficiency were investigated. The results indicated that NO oxidation efficiency increased with the discharge power. And the increase of O3 dosage imposed a significant influence on NO oxidation efficiency. However, little effect of O2 flow rate on NO oxidation efficiency was observed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.