Issue |
E3S Web Conf.
Volume 55, 2018
XXIIIrd Autumn School of Geodesy
|
|
---|---|---|
Article Number | 00013 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/20185500013 | |
Published online | 21 September 2018 |
Analysis of power lines span geometry based on TLS measurements
University of Agriculture in Krakow, Faculty of Environmental Engineering and Land Surveying, 21 A. Mickiewicz Av., 31-120 Krakow, Poland
* Corresponding author: andrzej.kwinta@ur.krakow.pl
The inventory measurements of utility infrastructure are crucial issues in the field of engineering geodesy. Secure usage of power lines requires to monitor their geometry. According to classical approach to measurements of geometry of overhead power lines, it usually allows only to measure directly. Geodetic methods cannot be applied due to measuring limitations (lack of an appropriate area to conduct a measurement). Currently in engineering geodesy it is becoming more common to use methods of laser scanning as well as Unmanned Aerial Photogrammetric Survey. In the Paper, the procedure of determining of an overhead power line’s geometry is presented on the example of an one span measured with Terrestrial Laser Scanning methods. Field measurements were conducted by using laser scanner. Afterwards the point cloud was processed in order to receive the geometry of conductor. Finally, results were presented is tabular and graphic form.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.