E3S Web Conf.
Volume 56, 2018VII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2018)
|Number of page(s)||7|
|Section||Problems of Complex Processing of Mineral Raw Materials and New Technologies of Mineral Processing|
|Published online||26 September 2018|
Processing of refractory gold sulphide carbonbearing ores by means of their pre-oxidation with water-and-gas emulsions prepared in electrochemical and photochemical reactors
Mining Institute of Far eastern branch of Russian Academy of Sciences, Khabarovsk, Russia
2 Limited Liability Corporation “IG Copper LLC”, Russia
* Corresponding author: email@example.com
In connection with the depletion of mineral resources base of gold, the engagement of refractory ores reserves in the processing becomes a necessary condition to stabilize gold market. Standard methods of processing of refractory sulphide carbon-bearing gold ores and float concentrates extracted from them include pressure oxidation and bacterial oxidation enabling the liberation of dispersive gold and oxidation of carbon having parasitical sorption with further cyanation. The alternative solution of the aforementioned problem is pre-oxidation of refractory ores with water-and-gas emulsions. Theoretical basis for active water-and-gas emulsions formation with the use of electrolytes solutions electrolysis in combination with ultraviolet exposure is stated in the article. Given method of water-and-gas emulsions preparation ensures the formation of active oxidants complex. Gold recovery into pregnant solutions up to 55.7 - 73.5% by chloride scheme was reached in laboratory experiments on samples of sulphide carbon-bearing ore, herewith 18% was recovered using cyanic solution. Based upon experimental findings, process scheme for combined oxidative preparation of sulphide carbon-bearing ore with dispersive deportment of gold was developed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.