E3S Web Conf.
Volume 59, 20182nd International Conference on Science and Technology Current Issues in Water Distribution and Treatment (CIWT 2017)
|Number of page(s)||4|
|Published online||16 October 2018|
One or more water demand patterns? - Calibration of the selected water network model
Lublin University of Technology, Faculty of Environmental Engineering, Nadbystrzycka 40B, 20-618 Lublin
* Corresponding author: firstname.lastname@example.org
Calibration is one of the key steps in creating a numerical model of water supply networks. Calibration is performed on the basis of the results of the field measurement campaign and it should result in a consistent match of the simulation results with the results of the measurements. In the article the process and the results of the calibration of the selected water network model with the use a single (generalized) water demand pattern and using 11 patterns prepared for selected, characteristic consumers have been presented. Calibration was performed using the trial and error method in EPANET 2.0 and the optimization method in WaterGEMS.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.