Issue |
E3S Web Conf.
Volume 59, 2018
2nd International Conference on Science and Technology Current Issues in Water Distribution and Treatment (CIWT 2017)
|
|
---|---|---|
Article Number | 00027 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/e3sconf/20185900027 | |
Published online | 16 October 2018 |
Disinfection by-products monitoring in water of selected outdoor swimming pools in Opole Voivodship
1
Opole University of Technology, Department of Thermal Engineering and Industrial Facilities, Mikolajczyka 5 St., Opole, Poland
2
Opole University of Technology, Department of Environmental Engineering, Mikolajczyka 5 St., 45-271 Opole, Poland
3
Opole University of Technology, Department of Process Engineering, Mikolajczyka 5 St., 45-271 Opole, Poland
* Corresponding author: i.klosok-bazan@po.opole.pl
The aim of this study was to determine the level of disinfection by-products in selected outdoor swimming pool in the Opole Voivodship. The authors paid special attention to the determination of the concentration of trihalomethanes (THMs), which are formed during disinfection in water. Five outdoor swimming pools were selected in five different cities located in Opole Region. The level of trihalomethane (THM) concentrations in the analyzed waters was found to be in the wide range from 15 to more than 550 µg/L. The dominant compound of THMs was chloroform because of chlorine application in the disinfection method.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.