E3S Web Conf.
Volume 60, 2018Ukrainian School of Mining Engineering
|Number of page(s)||10|
|Published online||16 October 2018|
Recommended and experimental values of the earth surface shift troughs parameters when conducting the stope works
Donbas State Technical University, Mining Department, 84 Peremohy Ave., 93100 Lysychansk, Ukraine
2 Donbas State Technical University, Department of Ecology, Life Safety and Labor Protection, 84 Peremohy Ave., 93100 Lysychansk, Ukraine
* Corresponding author: firstname.lastname@example.org
The correspondence of angular and linear parameters of the undermined rocks displacement and the crustal movement to their values determined according to the normative document has been established. Based on the surveying observations over the reference points movement on the earth surface and the stope face advance, the empirical curve of the trajectory of the earth surface maximum subsidence is determined from the points of maximum subsidence. The curve of the maximum subsidence of the earth surface points when removing the stope face from the face entry has been experimentally established, which allowed to determine the location of the point of the beginning of the crustal movement and the dimension of the stope mine working corresponding to this situation. The coordinates of the characteristic points of the earth surface subsidence above the stope face have been determined. A unified method has been developed for determining the angular and linear parameters of the undermined rocks displacement for the two stages of shift troughs formation on the earth surface. The nonconformities have been established between the recommended parameters and the experimental data normative documents during the anthracite seams mining.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.