| Issue |
E3S Web Conf.
Volume 61, 2018
International Conference on Renewable Energy (ICREN 2018)
|
|
|---|---|---|
| Article Number | 00017 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/20186100017 | |
| Published online | 31 October 2018 | |
A comparative analysis of heat recovery and product stabilization in fluid-bed and ablative pyrolysis systems
Natural Resources Canada, CanmetENERGY, 1 Haanel Drive, Ottawa, Ontario K1A 1M1, Canada
* Corresponding author: Murlidhar.Gupta@Canada.ca
Nearly all existing commercial pyrolysis technologies employ single-step rapid condensation of vapours from 500 oC to 50 oC using sprays of cold bio-oil or liquid hydrocarbon as a quench fluid. This approach produces raw bio-oil, a non-homogenous mixture of hundreds of oxygenated organic compounds including organic acids and water. Single-step quench also results in loss of high quality heat to the ambient. In this work, a novel 3-stage fractional condensation approach has been proposed. The intent is to produce targeted stable products for value added applications as well to enhance the overall efficiency of pyrolysis processes. The first phase of this research involved modelling and simulation of staged condensation of pyrolysis vapours using Pro/2 process software. A comprehensive pyrolysis model with 13 representative compounds was developed and validated. The Pro/2 model is able to simulate complex condensation of lignin and sugar fractions at high temperatures. Multiple cases involving staged condensation in ablative and fluid bed pyrolysis systems were investigated. In each case, there was a trade-off between high-quality heat recovery and early separation of lignin and sugars from organic acids. Results demonstrated that dew point depression adds additional complexity and limits heat recovery. However, judicious selection of condenser temperatures offers opportunity for early isolation of sugars and lignin from acids, thereby improving product stability.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.