Issue |
E3S Web Conf.
Volume 64, 2018
2018 3rd International Conference on Power and Renewable Energy
|
|
---|---|---|
Article Number | 06006 | |
Number of page(s) | 5 | |
Section | Photovoltaic Systems and Power Generation Technologies | |
DOI | https://doi.org/10.1051/e3sconf/20186406006 | |
Published online | 27 November 2018 |
Parameter Identification and Effect of Partial Shading on a Photovoltaic System
Department of Energy Engineering, Aalborg University, Esbjerg 6700, Denmark
Partial shading cause significant losses to the performance of a photovoltaic (PV) system. So, it is imperative to study effects of partial shading; for that a two-diode model of the experimental setup made. Upon verifying the model with the experimental parameters, a MATLAB/Simulink model is made based on this model. Various shading patterns, the effect of bypass diodes; the effect of overlapping bypass diode is studied on this MATLAB/Simulink model. It is found out that the reduction in power loss is depended on the location of the shaded cell but not the area of the shaded cell. Also, the over-lapping bypass diode configuration has a slight improvement in the PV performance compared to the non-overlapping bypass diode configuration. An experimental test is also conducted by applying different shading pattern and they proves the results are compatible with the simulated results.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.