Issue |
E3S Web Conf.
Volume 64, 2018
2018 3rd International Conference on Power and Renewable Energy
|
|
---|---|---|
Article Number | 07007 | |
Number of page(s) | 5 | |
Section | Electrical Engineering and Mechatronics | |
DOI | https://doi.org/10.1051/e3sconf/20186407007 | |
Published online | 27 November 2018 |
Analysis and Design of Filament Power Supply with Voltage-Fed Single-Switch ZVS Inverter
Ming Chi University of Technology, New Taipei City, Taiwan
In this paper, an off-line voltage-fed single-switch zero-voltage-switching (ZVS) inverter is analyzed and designed for the filament power supply of cooker magnetrons. Due to the low resistance of cathode filament, an isolation transformer with large turn ratio is used. To obtain the ZVS operation, a parallel-resonant capacitor is connected to the primary of transformer. The capacitor, transformer and filament constitute a parallel resonant tank. Both the transformer leakage inductance and the transistor output capacitance are merged into the resonant tank. The resonant energy provides the ZVS operation of the inverter switch, and the secondary voltage drives the cathode filament. To verify the analysis, a prototype inverter is built and tested. Experimental results validate the circuit design.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.