Issue |
E3S Web Conf.
Volume 65, 2018
International Conference on Civil and Environmental Engineering (ICCEE 2018)
|
|
---|---|---|
Article Number | 06007 | |
Number of page(s) | 6 | |
Section | Geotechnical Engineering | |
DOI | https://doi.org/10.1051/e3sconf/20186506007 | |
Published online | 26 November 2018 |
Introducing a New Method for Ground Structure Estimation using Microtremor Array Observation Technique
School of Civil Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
* Corresponding author: benjamincheah1994@gmail.com
Ground structure characteristic is an important parameter in seismic site effect evaluation for earthquake structural design. Many geophysical methods can be used to estimate ground structure. The best field measurement option that requires least field effort and yet producing accurate estimation is the main concern of this study. This study applies microtremor array observation method to investigate the accuracy of dispersion curve estimated using Centerless Circular Array (CCA) methods of 5m radius. The dispersion curve observed was assessed by comparing to theoretical dispersion curve generated from proposed shear wave velocity (VS) profile of sites. The observed dispersion curve shows good agreement with theoretical dispersion curve over a wide frequency range, which is ranging from 3 - 10 Hz. This segment of dispersion curve can be utilized to estimate ground structure by means of inversion of dispersion curve. CCA method is capable to be used to estimate ground structure in term of VS profile.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.