Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
---|---|---|
Article Number | 01006 | |
Number of page(s) | 6 | |
Section | Smart Grid and Regulation | |
DOI | https://doi.org/10.1051/e3sconf/20186701006 | |
Published online | 26 November 2018 |
Design of Arduino-based small wind power generation system
Universitas Negeri Jakarta, Faculty of Engineering, Jalan Rawamangun Muka Jakarta Timur 13220, Indonesia
* Coresponding author: a.goffar.almubarok@gmail.com
Wind energy is a less-attended renewable energy due to the lack of information about its potential. Some pilot wind turbines were not managed properly and built without considering to the technical feasibility. This study aims to propose a preliminary design of an Arduino-based small wind power generation system. The electricity which is generated by the wind charges the battery. It supplies power of information system which transmits the data of wind speed and wind direction from the remote location to the web server through GPRS network. The remote location which is completed with mobile data coverage is essential for this study. The results of this study are (1) the battery charging stop automatically when the battery is full (2) the data of wind speed and wind direction can be accessed through web browser or Android Smartphone. The data can be used for further analysis to determine the potential of wind energy at the site.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.