Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
---|---|---|
Article Number | 02022 | |
Number of page(s) | 7 | |
Section | Bioenergy | |
DOI | https://doi.org/10.1051/e3sconf/20186702022 | |
Published online | 26 November 2018 |
Simulation of a bioavtur production process from non-edible vegetable oil
Chemical Engineering, Chemical Engineering Department, Faculty of Engineering, Universitas Indonesia, Indonesia.
* Coresponding author: bambanghs@che.ui.ac.id
The increase in global aviation fuel demand has prompted ICAO to declare neutral carbon growth policy in 2050 by using bio based aviation fuel. The purpose of this study was to simulate the production of non-edible vegetable oil into bioavtur and obtain the most potential nonedible vegetable oil based on yield and conversion to be converted into bioavtur. Three potential sources to be converted into bioavtur are kosambi oil, nyamplung oil and kemiri sunan oil. This research was done by simulating of the hydroprocessing process with process simulator by varying the operating conditions on each raw material. Hydrotreating process was varied at 1-5 MPa pressure and temperature 250°C-350°C. The result showed the operating pressure with the highest conversion and yield are around 4MPa. While the operating temperature with high conversion and yield are above 290°C. Nyamplung oil has overall the largest yield and conversion than other nonedible vegetable oil with average 10% greater conversion and 3,3% greater yield at 2MPa.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.