E3S Web Conf.
Volume 70, 201817th International Conference Heat Transfer and Renewable Sources of Energy (HTRSE-2018)
|Number of page(s)||5|
|Section||Heat Transfer and Heat Exchangers|
|Published online||03 December 2018|
Boiling of a refrigerant of low GWP on the surface with copper microchannels
Kielce University of Technology, Faculty of Mechatronics and Mechanical Engineering, al. 1000-lecia Państwa Polskiego 7, PL-25-314 Kielce, Poland
* Corresponding author: email@example.com
The boiling curves and heat transfer coefficients between the heating surface and fluid were investigated in the paper. Copper samples with horizontal microchannels of rectangular cross-section, variable depth and width were the objects of the study. The following geometrical parameters have been used: microchannel width 0.2; 0.3 and 0.4 mm, depth between 0.2 and 0.5 mm (change every 0.1 mm). Boiling refrigerant was Novec-649 (GWP = 1), and the experiment was performed at atmospheric pressure. Geometrical parameters impact, within a given range of heat flux 3 – 130 kW/m2, on the heat transfer process was determined.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.