| Issue |
E3S Web Conf.
Volume 73, 2018
The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|
|
|---|---|---|
| Article Number | 01008 | |
| Number of page(s) | 4 | |
| Section | Energy Planning, Policy, and Management | |
| DOI | https://doi.org/10.1051/e3sconf/20187301008 | |
| Published online | 21 December 2018 | |
Characteristics Surface Temperature of Solar Cell Polycrystalline Type to Output Power
Electrical Engineering Departement, Faculty of Engineering, Sekolah Tinggi Teknik-PLN, Jakarta, Indonesia
* Corresponding author : isworop@yahoo.com
To meet the needs of electrical energy, there are alternative energy sources such as solar power in a form of solar power plant. An important equipment aim to handle the of converting of solar energy into electrical energy are solar cells. The development of devices used to modify solar energy into electrical energy has been done since the mid-first half of the last century. Gradually the device is named by scientists with a photovoltaic device, or so-called solar cells (solar cell. This research tested polycrystalline solar module in sunny weather, bright cloudy and overcast. The test results show the effect of solar cell surface temperature to the value of its output power [1]. The condition of the polycrystalline solar panels will work optimally at the measured 32° C - 50° C temperature range on the surface of the solar cell.
Key words: output / polycrystalline / power / solar cell / weather
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.