E3S Web Conf.
Volume 73, 2018The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|Number of page(s)||4|
|Section||Technology, Culture and Society in Waste Management|
|Published online||21 December 2018|
Alternative Selection in Reducing Wood Scrap with Green Productivity Approach
1 Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan - Indonesia
2 Department of Industrial Engineering, Faculty of Engineering, Universitas Prima Indonesia, Medan - Indonesia
* Corresponding author: email@example.com
This research was conducted in companies engaged in the production of furniture in North Sumatra. From observations made, seen piles of scrap pieces of wood from the rest of the production. This study was conducted to select the best alternative to reduce scrap wood with green productivity approach so that productions are going to more economical and productive. Green productivity approach to the reduction of scrap is performed by calculating Green Productivity Index. There are 3 alternative wood scrap reduction, which is: (1) Do not perform any conversion actions; (2) Wood scrap smoothed and pressed into the pressed wood as the “content” of the door, wood scrap that is usually used as a fuel in the boiler is replaced with oil palm pulp; and (3) Purchase the woods with appropriate size and produces scrap as minimum as possible. Alternative 2 was selected as the best alternative to the Green Productivity Index (GPI) Human amounted to 1, GPI Material 1.13, GPICapital1.06, GPI Energy at 1.16, and GPI Waste of 0.
Key words: Green productivity / financial analysis / scrap / alternative selection
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.