E3S Web Conf.
Volume 79, 2019International Symposium on Architecture Research Frontiers and Ecological Environment (ARFEE 2018)
|Number of page(s)||5|
|Section||Research on Civil Engineering and Geological Phenomena|
|Published online||15 January 2019|
Comparison and experimental verification of embedded parts of straight anchors under shear and tension-shear
School of Architectural Engineering, Nanjing Institute of Technology, Nanjing, 211167, China
* Corresponding author: firstname.lastname@example.org
As one of the important components of the joint connection in the steel-concrete structure, the embedded parts of straight anchors have a great influence on the safety performance of the structure. People have different opinions on the mechanism of the force of the embedded parts, and the calculation method of the bearing capacity of the embedded parts is also different. In this paper, the research on the theory of the sheared and tension-sheared parts of embedded parts of straight anchors in the previous literature and the current norms is conducted, and the existing calculation methods of the ultimate bearing capacity are compared. The calculation method is compared with the experimental results, and the theoretical verification analysis is performed. The research results show that: Nowadays, the calculation of the shear capacity of the anchored parts of the anchors is conservative, and there are some factors that have not been considered, so they are much smaller than the actual bearing values. For the shearing ability, the two are the calculated values whcih are close to the correlation between the pulling and shearing. When the embedded parts are damaged, the anchors fully give full play to the tension-shear effect, which can be used in the project.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.