Issue |
E3S Web Conf.
Volume 81, 2019
The 1st International Symposium on Water Resource and Environmental Management (WREM 2018)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/20198101007 | |
Published online | 30 January 2019 |
An integrated process involved coagulation and anaerobic sequencing batch reactor (ASBR) to remove organic substances in mechanical dewatering wastewater from municipal garbage
Harbin Institute of Technology, Shenzhen, 518055, China
* Corresponding author: sun_fy@hit.edu.cn
Mechanical dewatering wastewater (MDW) from municipal garbage is a mixture that is quickly separated from raw domestic waste by high-pressure extrusion without a sump fermentation process. Alkali treatment-coagulation sedimentation-ASBR treatment technology was adopted in this study to treat SS and organic matter. The results showed that the optimum pH of the alkali treatment was 9.0, polyaluminum chloride (PAC) was the best coagulant for the coagulation and sedimentation of MDW. The optimal working condition were gotten with a Ca(OH)2 dosage of 200 mg/L, a pH of 10.0, and a PAC dosage of 800 mg/L, under the intermittent stirring mode of 250 r/min for 1 min and then 50 r/min for 10 min. Perfect domestication effect of the ASBR was achieved under medium temperature for 28 days. The optimum conditions for ASBR were determined as follows: temperature was 35 °C, and organic loading rate (OLR) was 6 kg COD/ (L·d). Analysis of the microbial community structure succession showed that the success rate of anaerobic microorganisms in medium temperature ASBR was fast and adaptable. This study provides technical support for the actual application.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.