E3S Web Conf.
Volume 82, 201913th International Conference on Boiler Technology (ICBT Poland 2018)
|Number of page(s)||10|
|Published online||01 February 2019|
Ammonia desorption from fly ash
Silesian University of Technology, Institute of Power Engineering and Turbomachinery, Division of Boilers and Steam Generators, Konarskiego 20, 44-100 Gliwice, Poland
* Corresponding author: firstname.lastname@example.org
The main source of ammonia in ash are residues from an unreacted NH3 from the denitrification process, either from SCR or SNCR systems. The paper discusses the standards of NH3 content in fly ash and presents the most commonly used methods of removing excess ammonia from fly ash. In the next part of the work the results of laboratory tests on NH3 desorption are presented. Desorption was performed on samples of fly ash taken from the electrostatic precipitator of real PC boiler. Removal of NH3 from the ash was carried out in a heating chamber at 130°C and 150°C and detected by an analyser equipped with a NDIR sensor. Additionally, at the temperature of 130°C, the NDIR and analytical methods were compared (in accordance with the BN-750541-05 procedure) and the measurement uncertainty of both methods was estimated.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.