E3S Web Conf.
Volume 83, 20192018 International Symposium on Hydrogen Energy and Energy Technologies (HEET 2018)
|Number of page(s)||5|
|Published online||11 February 2019|
Effects of temperature on oxidation behaviours of 35CrMo in high temperature flue gas environment
Key Laboratory of Thermo-Fluid Science and Engineering of MOE, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, PR China
* Corresponding author: email@example.com
The pipelines made by alloy 35CrMo are widely used in the process of flue gas injection. Therefore, corrosion behaviours of alloy 35CrMo have been investigated at varied temperatures, namely 120 °C, 150 °C, 200 °C and 250 °C, with same experimental pressure of 9 MPa and flus gas environment. Scanning electron microscopy was employed to examine the morphologies and microstructures of the oxide films. The results indicated that moderate temperature stands an essential role in the reaction mechanism and aggressive effects. In addition to increase in the diffusion rate of both alloy ions and corrosive gas, temperature can also reform the morphology of oxides by resulting in larger oxide particles and thicker oxide films, plus the transmission from needle-like oxides to spherical oxides.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.