E3S Web Conf.
Volume 91, 2019Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|Number of page(s)||8|
|Published online||02 April 2019|
Masonry using “Termo Blok” blocks
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
The following article reviews a new masonry energy-efficient erection technology using hollow blocks termosblocks, which provides construction of vertically continuous and horizontally intermittent insulating layer. Thermal insolent insets are placed inside the inner cavities of the block. The study is aimed to establish the boundaries of using this technology. Therefore, central compression tests were conducted in order to determine the tensile strength of the block. Also, a reduced thermal resistance and energy-efficiency of a masonry fragment was calculated. In order to verify thermal engineering model, an experiment was conducted in which the temperature inside the structure was measured using contact temperature sensors. Additional control of temperature fields spreading was proceeded using thermal imager. On the basis of the obtained data, termosblocks masonry operational characteristics were estimated, and the study result was defined.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.