E3S Web Conf.
Volume 91, 2019Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|Number of page(s)||8|
|Published online||02 April 2019|
Evaluation of thermal properties of insulation systems in pitched roofs
1 Moscow State University of Civil Engineering, 129337, Yaroslavskoye shosse, 26, Moscow, Russia ;
2 LLC TEPOFOL 107140, Krasnoprudnaya str, 12/1, Moscow, Russia
3 Higher School of Economics, 101000, Myasnitskaya str. 20, Moscow, Russia
4 Scientific-research Institute of building physics, 127238, Lomonososky drive, 21, Moscow, Russia
5 Russian State Geological Prospecting University, 117997, Miklukcho-Maklaya, 23, Moscow, Russia
* Corresponding author: email@example.com
The article outlines the basic requirements for pitched roof insulation systems. The analysis of the properties of thermal insulation materials used in insulation systems was conducted. It is substantiated that the thermal resistance of such structures on the surface of the roof is formed taking into account the thermal conductivity of thermal insulation, thermal conductivity of wooden rafters and heat loss through the leakiness of joints and mounting devices. An assessment was made of the effect of loads of various types on the heat-insulating layer, namely: the effect of the air flow in the ventilated gap; the movement of the vapor-air mixture in the material; condensation of water vapor and penetration of drip liquid; exfiltration of air at the joints of the plates and on the surfaces of contact with the supporting structures. The expediency of using products on the basis of unstitched polyethylene foam in the construction of pitched roofs with a wooden roof system, taking into account the advantages and features of this material, as well as taking into account the possibility of creating a seamless insulating shell, is substantiated.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.