Issue |
E3S Web Conf.
Volume 91, 2019
Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|
|
---|---|---|
Article Number | 07004 | |
Number of page(s) | 8 | |
Section | Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/20199107004 | |
Published online | 02 April 2019 |
Restrained fall velocity of suspended solids particles sedimentation in still water
Moscow State University of Civil Engineering (MGSU) 129337, 26, Yaroslavskoye Shosse, Moscow, Russia
* Corresponding author: markova@mgsu.ru
The deposition rate is sufficiently studied in the case of single particles or in conditions of low concentrations of suspended matter, in which the precipitating particles do not affect each other. In the article, the method of calculation of the rate of the constrained deposition is offered, comparative calculations of the rate of the free and constrained deposition of particles are executed, the settlement results reflecting essential difference of the speed of the constrained and free deposition of particles are presented. The factors influencing the rate of confined deposition, among which the main one is the concentration of suspended matter in water, are considered. The experimental data confirming the reduction of speed of the constrained deposition of more than 3 times in a five-fold increase in the concentration of suspended solids is given. The dependence of the strained deposition rate of particles on the concentration of the suspension is obtained.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.