E3S Web Conf.
Volume 91, 2019Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|Number of page(s)||6|
|Published online||02 April 2019|
Application of environmentally friendly concrete demolition techniques in the repair of shipping locks
Moscow State University of Civil Engineering, Yaroslavskoye sh., 26, 129337, Moscow, Russia
* Corresponding author: email@example.com
The paper analyzes the traditional mechanic technique of concrete demolition and the promising hydro demolition techniques from viewpoint of waterworks operators. The mechanical concrete demolition technique using chisel hammers is immediately available for the use and relatively cheap, but it is associated with considerable labor cost, generation of dust and noise. Concrete hydro demolition technique using high-pressure water has much higher productivity and reduces repair completion time, does not damage reinforcement, and ensures good adhesion of new concrete to old concrete. Basic technical characteristics of hydro demolition equipment and its pricing are given. On the basis of the current situation with regard to the estimated regulation and financing of construction projects, including from budgetary funds, the author considered the possibility of using promising methods of removing exposed concrete of lock chamber walls. A comparison was made between the cost and the regulatory and actual labor intensity between the methods of mechanical and hydraulic destruction of concrete. It has been shown that application of the hydraulic demolition technique is constrained by financial capabilities and estimates regulatory requirements. For substantiation of using the concrete hydro demolition techniques, operators need to adjust the regulatory framework for federal assessments.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.