E3S Web Conf.
Volume 91, 2019Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|Number of page(s)||6|
|Section||Environmental Management and Environmental Economics|
|Published online||02 April 2019|
Reduction of terms of demolition works of fully assembled residential buildings in Moscow
Moscow State University of Civil Engineering, 26, Yaroslavskoe Shosse, Moscow, Russia
* Corresponding author: SlavinaAY@mgsu.ru
As of the end of 2017, in Moscow, there are 286 mapped five-story fully-assembled residential buildings of K-7, II-32, II-35, 1605-AM, 1MG-300 series with total area of 1046,7 thousand square meters. They were built at the beginning of the era of mass construction, in 1959 - 1962 years, and were distinguished by thin outer walls of lightweight ribbed expanded clay panels with unstable thermal protection properties. The technologies used in the construction of such buildings do not allow reconstructing them. Nowadays, the task of demolition of the neighborhood of five-storey houses in Moscow with the maximum possible reduction in terms of production of works and the maximum quality of work is very important. It is also necessary to ensure safe work and compliance with all sanitary standards. The order of execution of the works has a mathematical solution method. It identifies issues that arise in the alternating sections performing the process of demolition.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.