| Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
|---|---|---|
| Article Number | 01010 | |
| Number of page(s) | 7 | |
| Section | Smart City | |
| DOI | https://doi.org/10.1051/e3sconf/20199701010 | |
| Published online | 29 May 2019 | |
Features of BIM-modeling of engineering systems of the construction object
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: chelyshkovpd@mgsu.ru
† Corresponding author: braznikovpa@mgsu.ru
In this article, the possibilities of designing engineering systems of buildings with the use of information modeling tools are considered. In particular, the aspects of the process of designing power supply systems are discussed in detail. The analysis of software products on their adaptability to design problems and the regulatory framework of the Russian Federation is analyzed using the example of calculating the required illumination level for various types of premises (lighting engineering calculation).
The article considers two BIM-oriented programs performing the same process. In the course of the analysis, different approaches to accomplishing the task. In particular, similar program features were revealed, as well as their differences, which allow design engineers to develop project documentation with varying degrees of detail. Including a comparative analysis of the results of automated calculation with manual methods.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.