E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||10|
|Published online||29 May 2019|
Analysis of the temperature distribution in the place of fixing the ventilated facade
Czestochowa University of Technology, Faculty of Civil Engineering, st. Akademicka 3, 42-200 Czestochowa, Poland
* Corresponding author: email@example.com
Designers more and more often choose facade systems with ventilated layers for external walls, especially in the case of new buildings. They are also used to modernize existing buildings. Mechanical connectors are a characteristic element of these constructions. Often, they are ignored in calculating the heat balance of rooms and the entire building. Because they pierce the thermal insulation layer they cause point thermal bridges. The influence of thermal point bridges, usually made of aluminum, i.e. a material with very high thermal conductivity, for heat transfer turns out to be significant. Such thermal bridges significantly increase heat losses through building partitions. This situation increases the heat demand in the rooms to compensate for the heat loss. The article presents the results of the analysis of the impact of mechanical fasteners in ventilated facade systems on heat transfer in the building envelope. The influence of various materials and constructional solutions on the thermal conditions in these walls was investigated.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.