E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||6|
|Section||Modern Building Materials|
|Published online||29 May 2019|
Computer Research of Building Materials
Moscow State University of Civil Engineering, Yaroslavskoye shosse, 26, Moscow, 129337, Russia
* Corresponding author: vasilievaOA@mgsu.ru
A computer study of the technological processes for the production of building materials based on the use of reversible autocatalysis reactions is carried out. For the mathematical description of the process of autocatalytic reactions, mathematical models are used, described by a initial-boundary problems for the Carleman system. The considered mathematical model describes the autocatalysis reaction under the following assumptions: the rate of decrease in the density of positive ions is proportional to the square of the deviation of the density of positive ions from the equilibrium state, the rate of decrease in the density of negative ions is proportional to the square of the deviation of the density of negative ions from the equilibrium position and the law of conservation of the total charge of the system including liquid solution. This mathematical model is non-linear, therefore numerical methods are used for its study. For a numerical solution of the initial-boundary value problem for the Carleman system, a finite-difference method of the second order of accuracy is used. For the numerical investigation of the solution obtained, linear interpolation and spline interpolation are used. A numerical study is made on the dependence of the chemical reaction time from the parameters of the model and various initial conditions.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.