| Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
|---|---|---|
| Article Number | 02032 | |
| Number of page(s) | 6 | |
| Section | Modern Building Materials | |
| DOI | https://doi.org/10.1051/e3sconf/20199702032 | |
| Published online | 29 May 2019 | |
Effective polymer concrete on waste concrete production
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: lj211@yandex.ru
Finish materials in facade systems are experiencing significant stress associated with atmospheric and mechanical influences. The use of tiles with high durability and the ability to relax deformations will allow to obtain efficient cladding for building systems. The article presents the results of the selection of compositions and technologies of a composite material based on finely ground highly active waste produced by portland cement, mineral binder, additives based on polycarboxylic ether MC-6955, and polymer additive MC-Adhesive. MC-Adhesive is a polymer additive used for: a significant increase in flexural strength; reduce the elastic modulus; increase water resistance; increase the concrete mix cohesion; making coatings with high requirements for abrasion, low dusting and high resistance to aggressive substances.The article presents the results of research methods of selection of compositions of composite polymer concrete. The strength characteristics of polymer concrete with an average density of 2370-2450 kg/m3 are most dependent on the consumption of fine waste and polymer additives. The nomogram obtained as a result of an active experiment makes it possible to evaluate the dependence of the strength on these factors and select their optimal ratio.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.