Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
---|---|---|
Article Number | 04026 | |
Number of page(s) | 6 | |
Section | Reliability of Buildings and Constructions | |
DOI | https://doi.org/10.1051/e3sconf/20199704026 | |
Published online | 29 May 2019 |
Estimation of influence of heat-conducting inclusions on thermal protection of filler constructions of buildings
Khakass Technical Institute, Siberian Federal University, Department of Building, transport and mechanical engineering, 655017, Abakan, Khakasia, Russia
* Corresponding author: my4455@yandex.ru
Article represents recommendations on decrease in heat losses through heat-conducting inclusions of filler constructions of buildings. Recommendations are based on the analysis of calculations by a finite element method in software package Elcut. The purpose consists in the analysis of expediency of replacement of a steel reinforcement on glass composite reinforcement in design decisions of filler constructions in view of calculation of thermal fields. The way of decrease in the factor of cold bridges is researched by replacement of a steel reinforcement by glass composite reinforcement. It is analysed constructive units: fastenings of facing verst to a diaphragm of rigidity; adjunctions of an external wall to a column. On a result efficiency of replacement of a steel reinforcement on glass composite reinforcement in filler constructions of walls is revealed, and also results of calculation of thermal losses of design decisions of filler constructions of a building are resulted.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.