E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||6|
|Section||Reliability of Buildings and Constructions|
|Published online||29 May 2019|
Determining the interfaces parameters for geotechnical modelling
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: firstname.lastname@example.org
The article discusses the interaction of concrete structures with the soil, made on the basis of laboratory tests and numerical simulation. The objectives of the study were to obtain the strength characteristics at the contact of two different materials, to compare the obtained value of the strength reduction factor with the standard values, and also to determine the extent to which the interface must be taken into account when conducting numerical geotechnical calculations. The study was carried out using a direct shear test device, where the strength reduction factor was obtained, which characterizes the conditions of interaction between different materials at their contact. According to the results of numerical simulation, one can see how the consideration of the given characteristics of the material of the contact element affects the internal forces arising in the underground structure and its displacements. The test results showed that the particle diameter has a different effect on shear strength at the same level of normal stress. On the basis of the results obtained, conclusions were drawn on what needs to be paid more attention to when conducting laboratory tests, how strongly the consideration of contact elements with the correct set of properties affects the internal forces of the underground structure. Also, the remaining problems and factors not considered in this study determined the prospects for further research on the topic under consideration.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.