E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||8|
|Section||Reliability of Buildings and Constructions|
|Published online||29 May 2019|
Bearing capacity of steel thin-walled profiles in reliability assessment
Industrial University of Tyumen, Department of Building structures, 625000 Volodarsky str., 38, Tyumen, Russia
* Corresponding author: firstname.lastname@example.org
The increasing use of light steel thin-walled structures is determined by the efficiency of the production of cold-formed profiles. However, there are problems of calculating the reliability of thin-walled structures. In particular, it is necessary to specify the calculation of the generalized bearing capacity of an element from a thin-walled profile. Such an element is significantly affected by the initial geometric imperfections reducing its bearing capacity. At the same time the element is influenced by an uneven distribution of the mechanical characteristics of the steel over the section of the profile. A thin-walled element of paired sigma profiles with a section height of 300 mm was taken as the object of study. This paper presents the results of the calculation of the effective characteristics of a thin-walled profile operating under axial compression with bending without and with the initial geometric imperfections (additional eccentricity from the element’s initial curvatures). Besides, the paper reveals the results of laboratory studies of the distribution of the mechanical properties of steel over the cross section of a thin-walled profile after using direct and indirect test methods.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.