E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||8|
|Section||Reliability of Buildings and Constructions|
|Published online||29 May 2019|
Layered composite and contact layer. Effective modulus of elasticity
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: firstname.lastname@example.org
The effective modulus of elasticity of a layered composite is one of the important characteristics. At the moment, the so-called mixture formula is most often used to calculate this characteristic. However, as a number of experiments demonstrate, the formula of the mixture does not always allow calculating the effective modulus of elasticity. The reason for this fact is the inhomogeneous stress-strain state arising in a layered composite. This article presents a method for finding the effective modulus of elasticity of a layered composite based on the contact layer model. Such approach to the calculation allows us to take into account not only the volume content of the composite components, but also many other parameters of the model.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.