| Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
|---|---|---|
| Article Number | 06001 | |
| Number of page(s) | 9 | |
| Section | New Construction Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/20199706001 | |
| Published online | 29 May 2019 | |
Design features of bimetallic bridges
1
Volgograd State Technical University (VSTU), Survey and design of transport structures, 400074, Akademicheskaya St. 1, Volgograd, Russian Federation
2
Volgograd State Technical University (VSTU), Hydraulic and Earthwork Structures Department, 400074, Akademicheskaya St. 1, Volgograd, Russian Federation
* Corresponding author: sk0522@yandex.com
The Design and construction of metal bridges is the most reasonable from the structural and technological point of view, as well as from the standpoint of the implementation of non-standard engineering and spatial solutions. The weak point most often in this case is the efficiency of construction. To improve economic efficiency, it is recommended to use metal structures, the most loaded elements of the beams in which should be made of high-strength steels, and all other conventional rolled steel. Spans of a continuous plate should be designed in such a way that the spans moments are equal. The authors propose to assign the values of spans in accordance with their effective ratio and design the span structure of the three types of standard blocks.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.