| Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
|---|---|---|
| Article Number | 06033 | |
| Number of page(s) | 8 | |
| Section | New Construction Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/20199706033 | |
| Published online | 29 May 2019 | |
Flow drilling technology and thread forming - an economical and secure connection in hollow sections and thin-walled components
Faculty 2: School of Engineering – Technology and Life, HTW Berlin, 12459 Berlin, Germany
* Corresponding author: Roland.Heiler@htw-berlin.de
Detachable and highly loadable screw connections can only be realized in thin-walled components and in particular hollow profiles with great effort. The flow drilling technology and subsequent thread forming represents an economical and technically interesting manufacturing alternative. With Flow drilling, a bush is generated by a fast-rotating carbide taper mandrel and a high resistant internal thread can be produced in a subsequent manufacturing process. Conventional weldor rivet nuts can be replaced in many application areas.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.