E3S Web Conf.
Volume 100, 201911th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2019
|Number of page(s)||6|
|Published online||10 June 2019|
Performance of special type heat sink with an integrated synthetic jet actuator
Rzeszow University of Technology, The Faculty of Mechanical Engineering and Aeronautics, al. Powstańców Warszawy 8, Rzeszów, 35-959, Poland
* Corresponding author: firstname.lastname@example.org
The performance of special type heat sink with integrated synthetic jet actuator has been presented in this work. Synthetic jet is a flow technique which synthesizes stagnant air to a form of jet. Synthetic jet produces high turbulent flow and thus high heat transfer coefficient can be achieved. Standard heat sink with fan have limited applications in particular in a dusty industrial environment. Therefore, the use of new flow technique is optimistic. The paper presents preliminary results of heat sink thermal power and characteristic temperatures during synthetic jet switched on and off. The results show that under synthetic jet switched on, the dissipated heat is 3.7 times higher than when synthetic jet is switched off.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.