E3S Web Conf.
Volume 100, 201911th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2019
|Number of page(s)||8|
|Published online||10 June 2019|
URANS and ACM for determining the aerodynamic performance of vertical-axis wind turbine
1 Institute of Aeronautics and Applied Mechanics, Warsaw University of Technology, 00-665 Warsaw, Poland
2 DTU Wind Energy, Technical University of Denmark, Lyngby, 2800 Kgs., Denmark
* Corresponding author: email@example.com
This paper presents numerical results of a one-bladed vertical axis wind turbine using the k-ε RNG turbulence model. The rotor geometry was developed based on the research report available on the literature. The obtained results of aerodynamic blade loads and wake profiles downstream behind the rotor are in a good agreement with the experiment. This paper presents also the ability of calculating fluid flow parameters around the operating wind turbine by using the original approach – the actuator cell model (ACM).
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.