Issue |
E3S Web Conf.
Volume 102, 2019
Mathematical Models and Methods of the Analysis and Optimal Synthesis of the Developing Pipeline and Hydraulic Systems 2019
|
|
---|---|---|
Article Number | 02006 | |
Number of page(s) | 6 | |
Section | Optimal Development of Pipeline Systems | |
DOI | https://doi.org/10.1051/e3sconf/201910202006 | |
Published online | 14 June 2019 |
Methods for optimal loading of the prosumer’s heat source during the heating period
Melentiev Energy Systems Institute of Siberian Branch of the Russian Academy of Sciences, Laboratory of Heat Supply Systems, 664033 Irkutsk, Russia
* Corresponding author: postnikov@isem.irk.ru
The paper the one of current problem of transition of district heating systems (DHS) to the new type of intelligent and integrated systems. This problem is related to the implementation the technology of prosumer, which allows regulating its own heat loading ensuring the most efficiency heating modes by using its own heat sources (HS) and/or heat storages. The statement of considered problem is formulated as the search of the optimal loading relation between the own distributed HS of prosumer and the district HS of DHS, based on the criterion of minimal cost on heating to prosumer for each calculated time interval during the heating period. The practical researches based on calculating experiment using the test scheme of DHS is provided. The results of calculations are presented as diagram of prosumer’s and district HS loading for the considered DHS scheme, as well as the economic benefit when using distributed generation of prosumers.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.